NEXUS BW'S BOOSTER scooter instruction manual

Scooter Nexus 150: technical specifications

The main power unit is a four-stroke oil-cooled engine. One cylinder installed. The production element produces a power of 6.40 kW. The engine displacement is 149.6 cc. The engine is started in two ways: kick-; and electric starter. The main element of the transmission is the variator. The principle of operation of the fuel system is based on the principle of operation of the carburetor. The gas tank is designed for 5.5 liters of fuel.

Fast braking is achieved through a disc brake system. Brake discs are installed at the front and rear of the motorcycle. Basic geometric parameters of the scooter: length - 2145 mm; width - 730 mm; height - 1235 mm. The wheels are made of aluminum. The dry weight of the equipment is 119 kg.

Electric scooter 40kmh500W10kg Booster Sport in Moscow

Urgent Price Minimum NO BARGAIN Scooters are new in a box, unopened, there are several pieces. The salon closed, the salary was given in a batch of scooters, I am selling it urgently to pay off the loan. There are also external additional 36V lithium batteries for any 36V scooter model, there is an additional leather wide folding saddle for any scooter model with a shock absorber, the price is 2650 rubles. Model 2021 S2 BOOSTER SPORT Power Max 500W motor, speed Max 30-40 mph scooter weight 10.8 kg. compact and convenient. Attention, the wheels are normal 8 inches, they ride perfectly, not like runts on 6 inch geared wheels, the direct drive motor is brushless! A complete analogue of the E-Twow Booster with improvements and changes, a 36-volt battery, double spring suspension on the front and rear wheels, the shock absorber stiffness is adjustable on the rear, a manual drum brake has been added on the rear wheel, the inflatable rear wheel is very soft over bumps, the battery voltage has been increased to 36 volts, which makes the start of the scooter faster, the display on the steering wheel, which would get wet and fail in the rain, has been removed, replaced with a standard waterproof LED battery charge indicator with a throttle grip, the aluminum rear fender does not break down at all, there is cruise control, unit folding has been strengthened, a second handle has been added to fix the clamping of the folding unit, a stronger oval steering column, non-creaking, with level adjustment, the color is made silver and now even when you scratch the scooter during operation, the scratches are not visible since the color is silver to match the color of the aluminum material of the scooter itself, this color allows for a long time keep your scooter in perfect condition without scuffs or scratches. The model is very successful; it folds compactly and fits under the seat in the subway. The battery is strong 36 volts, the wheel motor is 8 inches of direct drive without any gearboxes like in small scooters with 6 inch wheels, a correspondingly reliable design, the aluminum rear fender does not break at all like other models, there is an excellent wheel at the back with an inflated tire that is very soft over bumps, Unlike plastic wheels, a normal hand brake is also installed (drum in the rear wheel), it brakes perfectly even for a heavy person, I am 132 kg with a backpack of 142 kg, it brakes perfectly right away, since the drum brake does not get dirt in, even when driving through puddles, there is also front electric brake which charges the battery. The battery indicator on the steering wheel and the throttle grip are protected from rain. You can ride in pouring rain.

Scooter Zoom 150: detailed review

The first thing to highlight is a modern, eye-catching design. The appearance of the scooter makes all passersby turn around, without exception. All components and assemblies are hidden behind flexible and very durable plastic. It takes a lot of effort to damage the facing material. The aggressive body kit of the model attracts the attention of young people, who very often prefer the Zoom 150 scooter. Control of the moped is very simple, so a woman and even a small child can easily ride the equipment. The gearbox is automatic, or to be more precise, a variator is installed. That is, there is no need to distract your attention by switching gears while driving.

A headlight is provided in the front part to illuminate the road surface at night. Due to the lens system, high-quality lighting is possible in low/high beam mode. For controlled movement and safety, rear-view mirrors are installed on the sides. From the side, what immediately catches your eye is the sports muffler, which serves as the main element for processing exhaust gases.

The scooter is quite comfortable for two people to ride. A special seat provides a soft landing for both driver and passenger. Footrests are provided for the person sitting in the back. There is a small glove box under the steering wheel. You can put your mobile phone, wallet, documents and other small items there.

Dynamic driving is made possible thanks to a 4-stroke engine with a cylinder working surface of 149.6 cc. For city travel, power is 8.6 hp. more than enough. It is worth noting the economical fuel consumption, which allows you to drive for a long time without refueling.

NEXUS BW'S BOOSTER scooter instruction manual

Your scooter is a product manufactured using professional equipment and high-quality components. It is equipped with an electronic ignition system, an electric starter, and its consumer properties are at the level of the world's leading manufacturers - economical engine, low noise level, good acceleration dynamics and excellent handling. All these qualities are combined so that your scooter becomes a high-tech and comfortable conqueror of city roads. This manual provides detailed information about your scooter - how to ride and maintain it correctly.

The manufacturer hopes for your understanding regarding the possible discrepancy between the illustrations in this manual and the actual appearance of the Nexus Booster scooter; this is due to the constant modernization of production and differences in the configuration of the models. Please read these instructions carefully. We wish you good luck on the roads and enjoy using the Nexus Booster scooter. PRECAUTIONS 1. Follow traffic rules and check the scooter before driving (check the motor and other components; if damaged, be sure to replace them). 2. Never drive while drunk. 3. Avoid driving if you feel unwell. 4. Try to wear bright, catchy clothes. 5. Overtaking of any type of transport is prohibited. 6. You can give a warning signal using the button located on the steering wheel. 7. Do not wear clothes that are too long, as they may get twisted in the wheels and cause damage to the moped.

PROTECTIVE DEVICES Use special protective devices (helmets, protective belts), they are the most important factor in a person’s safety from injuries and injuries in the event of an accident. To ensure personal safety, you should wear high-quality protective helmets and leather clothing, as well as durable leather boots and gloves.

MODIFICATIONS Additional modifications or removal of original equipment may result in the scooter malfunctioning.

LOADING RULES Improper loading may affect the stability of the scooter. It is necessary to distribute the weight evenly and adjust the pressure of the tires and shock absorbers. Do not overload the vehicle or place heavy things on the steering wheel. The maximum load of the scooter is 100 kg.

DESCRIPTION

1. Horn button; 2. Light switch; 3. Low and high beam switch; 4. Rear view mirror; 5. Speedometer; 6. Front light switch; 7. Gas handle; 8. Front brake; 9. Start button; 10. Ignition switch.

1. Headlight; 2. Side stand; 3. Main step; 4. Seat lock; 5. Air filter

1. Main step; 2. Muffler; 3. Taillight; 4. Trunk; 5. Shock absorber.

Functions:

1. The speedometer indicates the speed of the vehicle; 2. The turn indicator lights up when the turn signal lights are turned on; 3. The odometer reflects the total number of kilometers traveled by the moped; 4. The fuel indicator shows the amount of fuel in the tank; 5. The warning light comes on when there is a lack of engine oil in the fuel tank.

EGNITION LOCK

OFF: The position in which you can remove the ignition key, while all electrical circuits of the moped are turned off. ON: Operating position of the lock, the ignition and electrical circuit are turned on. The key is locked. LOCK: The engine cannot be controlled.

LOCKING LOCK The locking switch is located in the ignition switch. To lock the steering wheel, you must insert the key and turn it counterclockwise to the LOCK .

SWITCHES

1. Headlight dimmer; 2. Turn signal; 3. Klaxon;

TURN SIGNAL SWITCH

The turn signal switch has the following positions: < left turn; > right turn.

KLAXON To play a sound signal, press the horn button.

HEADLAMP SWITCH The headlight switch has three positions: “”” the headlight, speedometer light and taillight light turn on, “” the speedometer light and taillight light turn on, » the headlight, speedometer light and taillight turn off.

START BUTTON The start button is located on the right. Insert the ignition key and turn it to the on position. Click the start button. Turn the accelerator handle to refuel. The engine will start running.

FILLING THE FUEL TANK

For refueling, use AI 95 gasoline. Manually open the tank cap, insert the key, turn it counterclockwise to open the tank cover. Attention: When filling the fuel tank, place the filter screen in the fuel tank. The fuel can be specially filtered before filling the fuel tank. Gasoline is flammable. Stop the engine before refueling. Smoking near the tank is prohibited. Do not overfill the tank with fuel. Close the fuel tank cap after filling. RECOMMENDATIONS FOR THE USE OF LUBRICANTS

Engine oil is an important factor affecting engine performance and life. We recommend the 15W/40QE oil brand. To change engine oil, you need to drain the used oil, wash the crankcase with detergent and dry it.

TIRES Make sure your tires are inflated to the correct pressure. Attention: 1. It is very dangerous to use old tires. This can affect traction, stability and balance. Incorrect or insufficient pressure can damage your tires. 2. Check for any sharp or cutting objects or signs of deformation on the tires. If any damage is found, contact a service station for further repair or replacement of the tires. 3. If there is a sharp impact or other damage to the tire, it should be replaced, because When driving, the vehicle may spin out of control. Checking your balance after changing your tires ensures safety. During the first 24 hours after replacement, you should not exceed a speed of more than 40 km/h. The tire should only be dismantled using special tools and protective equipment.

FRAME AND ENGINE NUMBERS The frame number is located on the frame and contains 17 characters. For example, LAAA*** ** * 9 * * * * * *. The engine number is located below the crankcase and consists of 9 characters: “ * * * * * * * * * “ The moped data plate is attached to the front protective cover.

ACTIONS BEFORE USING THE SCOOTER 1. Before driving, check that the vehicle is in good condition. 2. Check the oil level. Replenish it if necessary. 3. Check for oil leaks. 4. Check the fuel level in the fuel tank. 5. Check the front and rear brakes. 6. If necessary, adjust the free play. 7. Check tire pressure, degree of wear and possible damage. 8. Check the gas system, idle speed, operation of headlights and signal lights. 9. Make sure that all parts of the moped are securely fastened. Attention: Check the fuel lubrication channel to make sure it is airtight and safe. Inspect the oil tank cap and replace it if necessary. When refueling, make sure that fuel does not spill outside the fuel tank. Blown fuses should be replaced with new ones of similar specifications. The electrical parts between the ignition coil and the spark plug must be securely connected.

STARTING THE ENGINE Insert the ignition key. Press the electric starter button and turn the throttle to supply fuel, the engine can be started. Attention: To avoid rapid battery drain, the startup time should not exceed 3-5 seconds. While starting the engine, it is not allowed to press the start button. If the engine does not start after three attempts, use the kickstarter.

ENGINE BREAKING IN When breaking in a new vehicle, it is necessary to travel a distance of 1200 km. During break-in, full speed is not allowed. 1) the first 600 km. It is necessary to allow the engine to cool for 0.5-1 hour and change the speed periodically (no more than 30 km/h). 2) 1200 km. The speed should not exceed 40 km/h, the time of use of the moped should not exceed 2 hours. Attention: After running in 1200 km, it is necessary to replace lubricants and clean the air filter.

OPERATING THE NEXUS BOOSTER SCOOTER 1. Start the engine at idle speed. 2. Gradually increase (decrease) engine speed. 3. Survive the front brake. When driving on wet or slippery roads, avoid sudden acceleration or braking. Rails, steel plates in construction sites and canal covers, are very slippery. Before crossing them, reduce your speed and keep the vehicle upright. Before starting the moped, perform a complete inspection of the brake system. Do not overload the vehicle.

PARKING It is necessary to start stopping by releasing the gas and speed. Press the brake and after turning off the moped, park.

MAINTENANCE I - Inspect, clean, adjust, lubricate, replace. C - clean. R - replace. A - fix. L - lubricate.

SELECTION AND REPLACEMENT OF SPARK PLUG

Remove the spark plug cap. Remove all contaminants. Use a wrench to remove the spark plug, use a brush to clean it of soot and dirt, and check it for corrosion. Replace it if necessary. Check the gap between the electrodes, it should be 0.6-0.7 mm. Install the spark plug by hand.

CLEANING AND INSTALLING THE AIR FILTER The air filter must be washed after a run of 1000 km. The air filter is based on foam.

1. Disconnect the air filter, unscrew the screws, clamps, and remove the air filter. 2. Replace the filter element if it is damaged. To install the air filter, perform the procedure in reverse order. Note: The air filter should be changed every 8000 km.

INSPECTION AND ADJUSTMENT OF GAS

Inspect the throttle handle to make sure it can rotate. Check the cable under the carburetor. Replace it if necessary. Free play - 2 - 6 mm.

ADJUSTING THE CARBURETOR

Start the engine and warm it up. Adjust the idle speed screw. The speed should reach 1900 + 190 rpm. Turn the knob clockwise to increase the idle speed.

CHECKING AND CHANGING OIL

Change of oil. 1. Warm up the engine. After turning off the engine, drain the oil. 2. Place an empty tank under the engine, unscrew the oil drain cap. Wash the tank with a special detergent. 3. Pour 800 ml of new 15W/QE 4-stroke engine oil through the filter. 4. Close the lid

Check the tank for possible leaks.

CHANGING TRANSMISSION OIL

1. The engine must be warmed up for 3 minutes. 2. Drain the oil. 3. Place an empty oil tank under the gearbox, unscrew the oil drain cap 1, check the sealing washer. Install the drain cover. 4. Unscrew bolt 2 and pour 110 ml of new oil through the oil filter.

CHECKING AND ADJUSTING SCOOTER BRAKES Checking and adjusting the front brake. 1. Adjust the free play by turning the accelerator. Rotating clockwise will decrease free play. Checking and adjusting the rear brake. 1. Measure the free play of the rear brake lever (20-30 mm). 2. Adjust the free play (clockwise - decrease the free play). 3. After adjusting the free play, check the operation of the brakes.

OPERATION OF THE BATTERY To operate the moped, a 12V 7Ah rechargeable battery is used, which is a source of direct current. Attention: 1. To prevent electricity leakage, remove the battery from the moped not used for a long time. Disconnect the negative wire. The charged battery should be stored in a cool place, protected from light. 2. When installing the battery, connect the positive wire first and then the negative wire. The polarity must match. 3. The battery should be replaced with a battery of the same specifications. Checking and adding electrolyte. The electrolyte level should not exceed the upper or lower marks (if the level is too low, add distilled water). Attention: When adding distilled water, the air line must be connected to the exhaust pipe. Water should only be added to the battery (adding water may shorten battery life). Too high an electrolyte level can cause engine corrosion. Excess electrolyte must be removed. The air duct must be installed according to the instructions, without bends or deformations.

CHECKING THE FUSE If the fuse burns out, it must be replaced.

CLEANING THE SCOOTER 1. Check the moped for possible damage. 2. Ignition switch, switches, tools, wheels, exhaust pipe should not be washed with water pressure. 3. After cleaning, the vehicle must be wiped dry. 4. Start the engine and warm it up for a few minutes. 5. Check that the brakes are working properly.

CARING FOR THE SCOOTER 1. Wash the moped and wipe it dry. Rub the paint with special wax. 2. Drain the fuel tank and carburetor. 3. Remove the spark plug. Fill the cylinder with machine oil (15-20 ml). Turn off the ignition switch. After filling the cylinder with engine oil, install the spark plug. 4. Remove the battery, it should be stored in a dry, cool and dark place. 5. Inflate your tires. 6. Cover the vehicle with a special cloth. The moped must be stored in a place protected from light, temperature and water.

USING THE NEXUS BOOSTER SCOOTER AFTER STORAGE 1. Remove the cover and clean the scooter. 2. Check battery operation. 3. Fill the gas tank. 4. Check that the scooter is working properly.

Technical characteristics of the Nexus Booster scooter

CONDITIONS OF WARRANTY Dear Buyer! Thank you for purchasing the Nexus Booster scooter from our company MOTOCONTINENT. We hope it will serve you flawlessly for a long time. This scooter is a vehicle that requires registration with the traffic police and a driver's license. At the same time, it is a complex technique that requires compliance with certain rules of operation and care. Consumer claims that comply with the legislation of the Russian Federation can be presented during the warranty period, provided that the defects in the scooter did not arise as a result of the consumer’s violation of the rules of use, transportation, storage, actions of third parties, force majeure (fires, natural disasters, etc. ). Warranty service for mopeds is carried out at maintenance facilities authorized by the seller. To confirm the date of purchase of the moped during warranty repairs or present other requirements provided for by law, we kindly ask you to save the accompanying documents (instructions, warranty book). Conditions for providing the guarantee: • Availability of identification marks of the manufacturer; • Strict compliance with the requirements and recommendations set out in the Nexus Booster scooter Operation Manual; • Compliance with the rules of care and maintenance of the scooter in accordance with the requirements and recommendations set out in the Nexus Booster scooter Operation Manual; • Always use only the recommended type of fuel and lubricants. The product is excluded from warranty service in the following cases: • mechanical damage resulting from falls and collisions; • non-compliance by the consumer with operating rules, use of the product for other purposes; • the presence of damage as a result of intentional or erroneous actions of the consumer; • operation of a scooter in winter (from November 1 to March 31), as well as during heavy rains and thunderstorms; • operation off public roads, as well as driving over rough terrain, deep puddles, sand and gravel; • damage or loss of the product due to force majeure (natural events, fire, lightning, etc.), accidents, etc.; • damage caused by foreign objects, liquids, insects and animals getting inside the product; • if there are traces of outside intervention or repairs are performed, the service is performed by a center not authorized by MOTOCONTINENT LLC; • presence of damage as a result of transportation. Attention: The warranty does not apply to the following components and assemblies classified as wearable and consumable materials: Electric lamps for lighting, brake lights and direction indicators; Brake pads and linings; Motorcycle tires with tubes; Accumulator battery; V-belt variator drive belt; Spark plug; Circuit breakers; Electric starter; Muffler; Switch; Rear and front shock absorbers.

In our store you can buy a Nexus Booster scooter.

See also other articles about scooters and mopeds: Operating manual (instructions) for the NEXUS F 22 S scooter Nexus Alfa moped Operating manual (applicable to the Nexus Racer model) User manual (operating manual) for the Vento Triton R4 scooter User manual (operating manual) manual) for the Nexus Master scooter User manual (operating instructions) for the Nexus Matrix scooter

Dashboard

All the necessary sensors and instruments are correctly placed on the dashboard. These include turn signal bulbs and low/high beams. Also located are the speedometer, tachometer, clock and fuel gauge.

Standard equipment includes ABS function and security alarm. The engine can be started remotely by first pressing the remote control.