Operating manual (instructions) for scooter NEXUS F 22 S


Scooter Nexus F22 4T 4-stroke 50 cc/cm

Delivery of goods (How can you receive the goods ordered from us)

1. Pickup from our warehouse:
Almost any product ordered on our website can be received on the terms of pickup from our warehouse. (Addresses and operating hours of warehouses and pickup points are in the “Contacts” section) To do this, you need to place an order on the website, indicating pickup as the delivery method.

Agree on the date and pickup point with your manager.

* In some cases, an advance payment for moving the goods may be required, which is automatically returned to the buyer upon receipt of the goods from the warehouse.

2. Delivery by our transport in Moscow and the Moscow region:

Products ordered in our online store are delivered throughout Moscow and the nearest Moscow region within 1-3 working days from the date of order.

Delivery is carried out during working hours from 9.00 to 18.00 (Weekends and evenings by agreement) on the day agreed with the Logistics Department. The exact delivery time is adjusted by the forwarding driver, depending on the traffic situation, and the buyer is notified by phone an hour in advance.

Delivery of goods in Moscow.

  1. The cost of delivery in Moscow within the TTK-MKAD for order values ​​less than 8,000 rubles. – 700 rub.
  2. The cost of delivery in Moscow within the TTK-MKAD for an order value of less than 20,000 rubles, but more than 8,000 rubles is 500 rubles.
  3. The cost of delivery in Moscow within the TTK-MKAD for order values ​​of more than 20,000 rubles. – is carried out free of charge.
  4. The cost of delivery outside the Third Transport Ring (to the center) by hired transport is 1,500 rubles.
  5. The cost of delivery at the time specified by the buyer is 1500 rubles.
  6. The cost of delivery in Moscow with travel outside the Moscow Ring Road is according to current tariffs + 35 rubles/km. from the Moscow Ring Road to the delivery point in one direction.
  7. The cost of delivery of heating equipment is 700 rubles. + 35 rub./km. from the Moscow Ring Road to the place of delivery in one direction (if delivery is carried out outside the Moscow Ring Road).

3. Shipping throughout Russia and abroad by transport and logistics companies:

You can see a detailed list of branches and representative offices in your region of the largest and most trusted transport companies in the section: Delivery in Russia.

Standard delivery terms:

  • Delivery time: 3 – 15 days (depending on the region of delivery);
  • The cost of delivery is determined for each case separately and depends on the weight and volume of the ordered goods, the selected transport company and the distance from Moscow;
  • delivery of the goods is carried out to the customer’s door and is handed over under a personal signature, if this is agreed upon by the customer with the transport company he has chosen;
  • all goods are packaged and protected from possible damage when sent from the warehouse;
  • Along with the goods, a warranty card, a cash receipt and a delivery note are sent;
  • Delivery to regions of Russia and abroad is carried out only on prepayment terms.
  • Delivery and forwarding to the TK Terminal within the Moscow Ring Road - Free for order amounts over 20,000 rubles

Important:

When choosing this delivery method, the client must indicate his preferred transport company in the comments to the order.

From the moment the order is transferred to the Transport Company, the fact of which the store confirms by sending the client a scanned copy of the delivery note to the e-mail specified when placing the order, the store is not responsible for loss or damage to the goods by the Transport Company.

The transfer of goods to the Transport company is carried out within 3 working days after the actual receipt of payment into our account

Dear Buyers and Partners - Our company fundamentally does not work with TC PEK, because this company cynically steals and breaks goods

We successfully work with wholesale and retail organizations, specialized stores, and private entrepreneurs. We have already formed a large and well-coordinated network of clients from many regions of Russia, but nevertheless we are constantly expanding our regional client network, inviting regional entrepreneurs to cooperate - for long-term cooperation on a mutually beneficial basis. To do this, we enter into a long-term supply agreement and send the goods to their destination. Payment for the ordered products is carried out on the basis of an invoice issued by us and as soon as the funds arrive in our bank account, we immediately dispatch the products through the transport company you specified to your address.

We ship our goods to customers and partners in all regions of Russia. Dispatch is carried out by transport companies, our own vehicles, as well as through courier services and on the terms of self-pickup.

To do this, we send you a completed invoice by e-mail, fax or regular mail - for non-cash payment through Sberbank or any commercial bank.

Upon receipt of funds in our bank account, we immediately dispatch the products. Delivery to a transport company in Moscow according to established tariffs; the cost of delivery itself is paid by the customer.

4. Sending goods by Russian Post (up to 20 kg) and EMS courier service (up to 31 kg):

Delivery by EMS Russian Post is carried out at the buyer's expense, the cost of delivery depends on the place of delivery and is agreed with the manager when confirming the order.

The order is sent by email after payment has been received into our account.

Important!

From the moment the order is transferred to the Russian Post office, the fact of which the store confirms by sending the client a scanned copy of the postal receipt to the e-mail specified when placing the order, the store is not responsible for loss or damage to the goods, as well as for delivery times.

List of cities to which we deliver equipment ordered from us by road:

Aprilevka, Balashikha, Bronnitsy, Vereya, prominent, Volokolamsk, Voskresensk, Vysokovsk, Golitsyno, Dedovsk, Dzerzhinsky, Dmitrov, Dolgoprudny, Domodedovo, Drezna, Dubna, Yegoryevsk, Zheleznodorozhny, Zhukovsky, Zaraysk, Zvenigorod, Ivanteevka, Istra, Kashira, Klimovsk, Klin, Kolomna, Korolev, Kotelniki, Krasnoarmeysk, Krasnogorsk, Krasnozavodsk, Krasnoznamensk, Kubinka, Kurovskoye, Likino-Dulyovo, Lobnya, Losino-Petrovsky, Lukhovitsy, Lytkarino, Lyubertsy, Mozhaisk, Moscow, Mytishchi, Naro-Fominsk, Noginsk, Odintsovo, necklace, lakes, Orekhovo-Zuevo, Pavlovsky Posad, Peresvet, Podolsk, Protvino, Pushkino, Pushchino, Ramenskoye, Reutov, Roshal, Ruza, Sergiev Posad, Serpukhov, Solnechnogorsk, Staraya Kupavna, Stupino, Taldom, Troitsk, Fryazino, Khimki, Khotkovo , Chernogolovka, Chekhov, Shatura, Shchelkovo, Shcherbinka, Elektrogorsk, Elektrostal, Elektrougli, Yubileiny, Yakhroma.

List of cities to which we deliver equipment ordered from us by transport companies:

St. Petersburg, Novosibirsk, Yekaterinburg, Nizhny Novgorod, Samara, Kazan, Omsk, Chelyabinsk, Rostov-on-Don, Ufa, Perm, Volgograd, Krasnoyarsk, Voronezh, Saratov, Tolyatti, Izhevsk, Yaroslavl, Ulyanovsk, Barnaul, Irkutsk, Khabarovsk , Vladivostok, Tyumen, Novokuznetsk, Orenburg, Kemerovo, Ryazan, Naberezhnye Chelny, Penza, Astrakhan, Lipetsk, Tomsk, Tula, Kirov, Cheboksary, Kaliningrad, Bryansk, Kursk, Magnitogorsk, Tver, Ivanovo, Nizhny Tagil, Belgorod, Arkhangelsk, Ulan -ude, Vladimir, Kaluga, Kurgan, Orel, Smolensk, Murmansk, Cherepovets, Chita, Volzhsky, Surgut, Saransk, Vologda, Tambov, Petrozavodsk, Komsomolsk-on-Amur, Kostroma, Sterlitamak, Nalchik, Yakutsk, Bratsk, Yoshkar-Ola , Dzerzhinsk, Nizhnevartovsk, Orsk, Angarsk, Syktyvkar, Nizhnekamsk, Stary Oskol, Biysk, Veliky Novgorod, Rybinsk, Engels, Blagoveshchensk, Norilsk, Balakovo, Petropavlovsk-Kamchatsky, Pskov, Severodvinsk, Armavir, Zlatoust, Kamensk-Uralsky, Syzran, Novocherkassk , Yuzhno-Sakhalinsk, Volgodonsk, Nakhodka, Berezniki, Abakan, Salavat, Rubtsovsk, Ussuriysk, Miass, Kovrov, Almetyevsk, Pyatigorsk, Kopeysk, Pervouralsk, Novomoskovsk, Odintsovo, Dimitrovgrad, Novocheboksarsk, Neftekamsk, Novy Urengoy, Murom, Kamyshin, Nefteyugansk, Cherkessk, Novoshakhtinsk, Yelets, Novokuybyshevsk, Derbent, Novembersk, Achinsk, Oktyabrsky, Kyzyl, Seversk, Arzamas, Obninsk, Leninsk-Kuznetsky, Zhukovsky, Mezhdurechensk, Kiselevsk, Ukhta, Elista, Artyom, Bataysk, Novotroitsk.

Nexus F22S

Nexus F22S scooter user manual

Technical characteristics of the Nexus F22S scooter

Dimensions1865 x 705 x 1142 mmEngineSingle cylinder, four stroke, air cooled
Wheelbase1324 mmCylinder volume150 cm3
Ground clearance150 mmMax. output power 6.0 kW/8000 rpm/5.0 kW/7000 rpm
Dry weight93 kgMax. net torque 8.0 N.m/5500 rpm/7.00 N.m/5000 rpm
Load capacity180 kgMax tank capacity6.3 l
Max. speed 120 km/hGasoline brand90#
Tires120/70 — 12Recommended motor oil10W40
IgnitioncapacitorLubricating oil volume0.9 l
Spark plugA7RTCFuse15 A
Battery12 V 7Ah

Recommendations for the load capacity of the Nexus F 22 S scooter. The Nexus F 22S scooter is designed for a driver and one passenger. When carrying a passenger, the driver may notice some changes in acceleration and braking procedures. However, if the Nexus F22-S scooter and its brakes are in good technical condition, you can safely carry a passenger and cargo within the load capacity specified by the manufacturer. Exceeding load limits or carrying unbalanced loads can seriously affect the Nexus F 22-S , braking and stability. Inappropriate modifications and poor maintenance also significantly reduce safety.

Description.

1. Left and right rear view mirror; 2. Left and right brake; 3. Helmet hook; 4. Speedometer; 5. Main switch; 6. Battery; 7. Air filter; 8. Seat lock; 9. Tail light assembly; Speedometer. Indicates the speed of the scooter in km/h or mph. Odometer. Indicates the total distance traveled in miles. White numbers on a black background correspond to the distance traveled in miles. Tachometer. Indicates engine revolutions per minute. Turn signal indication <>. Flashes when the turn lights1 are on. Speedometer; 2. Odometer; 3. Turn signal indicator; 4. High beam indicator; 5. Fuel sensor. CONTROLS. Main switch. ON POSITION: Electrical circuits are turned on. The engine can be started. The key cannot be removed. OFF POSITION: All electrical circuits are turned off. The engine is stopped. The key can be removed. LOCK POSITION: Steering is locked. The key can be removed. 10. Right and left reflector; 11. Oil reservoir; 12. Central support; 13. Pedal starter; 14. Side support; 15. Exhaust pipe; 16. Right and left rear turn signal; 17. Headlights; 18. Left and right turn signal; Fuel sensor. Indicates the amount of fuel remaining in the gas tank (the gauge does not operate when the main switch is in the OFF position). As fuel is consumed, the gauge needle moves from position “F” (full tank) to position “E” (empty tank). When the needle reaches position “E”, it is necessary to fill with gasoline with an octane rating of 90 or higher. There is no reserve gas tank. The display indicates the use of high beam. NOTE: Use low beams to avoid disturbing oncoming and ahead drivers. NOTE: * Do not leave the main switch in the ON position for a long time when the engine is stopped. This may drain the battery. * Lock the steering and remove the key after parking to avoid the scooter being stolen.
Steering lock. Turn the handles all the way to the left and lock the steering as described below to prevent theft of the Nexus F22S scooter: Press the key when it is set to the OFF position. Release the key. Turn the key to the LOCK position.
Switches located on the control handles. 1. Headlight switch. When the main switch is set to the ON position: 2. Turning light switch. Use this switch when turning or changing lanes. Press > when turning right; press < when turning left. When retreating, the switch returns to the center position. The turn signal does not turn off automatically. To cancel the signal, press the switch after it returns to the center position 3. Signal button. Press to make a beep sound. 4. Starter button. Use this switch when starting the scooter using the electric starter. 5. Light switch. NOTE: * Release the starter switch immediately after the engine starts. Do not reuse the switch if the engine is already running. * Do not keep the switch pressed for more than 4 seconds.
Fuel cap. Open: The gas tank is located under the seat. To open it, turn the brass cap counterclockwise. Close: Press down on the lid and turn it clockwise. Front brake lever. The front brake lever is located on the right control handle. Press down on the lever to activate the front brake. Rear luggage compartment. The compartment is located under the seat. Open the seat and you can store your helmet underneath. NOTE: * The key cannot be removed if the gas cap is not properly closed. Seat lock. To open the seats, insert the key into the lock and turn it as shown below. Return the seat to its original position and press down to secure it. Pull the seat up slightly to make sure it is securely fastened. Rear brake lever. The rear brake lever is located on the left control handle. Press down on the lever to activate the rear brake. Helmet hook. Hook is used to place a spare helmet

Pre-operational checks

POSITIONPROCEDURE
Front brakeCheck operation, free movement, brake fluid level and leaks. If necessary, add DOT3 brake fluid.
Rear brakeCheck function, condition and free movement. Check the adjustment if necessary.
Throttle gripEnsure that it is functioning as planned. Make adjustments if necessary.
Engine oilCheck the engine oil level and add it if necessary.
Tires/wheelsCheck tire pressure and inspect them for wear and damage.
Connecting and fastening elementsCheck all chassis fasteners. Tighten/adjust as necessary.
Lights/signals/switchesCheck operation.
FuelCheck the fuel level. Add fuel if necessary.

Brakes.

Check the free play of the brake levers and make adjustments if necessary. Make sure the brakes are working properly by testing them at low speed while driving.

NOTE: If you feel a squeezing sensation when pressing the lever, the brake system is faulty. Do not ride the scooter until the brakes have been repaired. Contact your dealer for repairs.

Brake fluid. Check the brake fluid level. If necessary, add brake fluid. Recommended brake fluid - DOT3

Press the brake lever several times. Check for brake fluid leaks from the joints of the pipes or the master cylinder.

NOTE: * Brake fluid may damage painted surfaces or plastic parts. Immediately wipe any brake fluid splashes from the scooter. * If a brake fluid leak is found, contact the leader for immediate repair. Such leaks are a sign of a dangerous condition of the scooter.

Engine oil.

Monitor the engine oil level. Make sure there is enough engine oil. If necessary, add engine oil. Recommended motor oil for 4-stroke engines is SAE 10W-40.

Gas handle.

Rotate the throttle and check its free play to ensure proper operation. Make sure that when released, the hand returns to its original position due to the force of the spring. If necessary, contact your dealer to make the necessary adjustments.

Tires.

For best handling, durability and safety, always check your tire pressure before riding your Nexus F22S.

Tire pressure should be checked and adjusted when the tire temperature is equal to the ambient temperature. Tire pressure should be adjusted according to the total weight of cargo, driver, passenger and accessories, as well as driving speed. Also pay attention to the tire walls.

Always check your tires before riding your Nexus F 22 S. Contact your dealer if the tread depth in the middle of the tire has reached the limit (as shown in the illustration). Replace the tire immediately if nails/glass shards become embedded in the tire or if there are cracks in the tire sidewalls.

Ensure that the total weight of cargo, rider, passenger and accessories does not exceed the maximum load capacity of the Nexus F22S scooter . Operating an overloaded scooter can result in tire blowouts, crashes and accidents.

Correct load distribution affects scooter characteristics such as handling, braking, acceleration and safety. Do not transport loosely secured items that could move while driving. Securely secure the heaviest items towards the center of the scooter and distribute the load evenly to the sides. Correctly adjust the suspension according to the load and check the condition of the scooter and tire pressure.

Fastening elements.

Before riding, always check the tightness of the connecting and fastening elements of the chassis. Have your dealer check the correct tightening torque.

Lights, signals and switches.

Check all lights. Make sure they are in working order. Check the operation of the switches on the control handles and the main switch.

Mirrors.

Adjust the mirrors as shown below for optimal visibility. Adjust the rear-view mirrors so that you can comfortably sit on the scooter and have a clear view of the traffic coming behind you.

Fuel.

Do not fill fuel above the lower end of the filler neck. When heated, fuel expands and may leak from the gas tank. Immediately wipe up any fuel splashes with a dry, clean cloth. Fuel may damage painted surfaces or plastic parts.

Operation of the NEXUS F22S scooter.

Park the scooter before starting the engine. Return the side support to its original position. Check if there is enough fuel and engine oil. Turn the main switch to the ON position. Release the throttle completely and press the rear brake lever. Press the starter switch. If the engine starts, do not touch the starter switch again. If the scooter is cold, pre-warm the engine for 1 to 3 minutes at idle before riding. NOTE: * To prolong engine life, never accelerate hard when the engine is cold. * After starting the engine, always return the pedal starter to its original position. * Exhaust gases are toxic; they can lead to loss of consciousness and even death in a fairly short time. Do not run the engine in areas without adequate ventilation.

If the engine does not start, release the starter switch, wait a few seconds and try again. To avoid draining the battery, each attempt should last no more than 4 seconds. If the engine does not start after 4-5 attempts, turn the throttle 1/8-1/4 turn, and then press the starter switch again.

If the engine does not start with the electric starter, or the scooter has not been used for a long time, turn on the main switch, turn the throttle and use the pedal starter to crank the engine.

Movement. 1. Press down on the rear brake lever with your left hand and grab the rear grip with your right hand. Slide the scooter off the main stand. 2. Sit astride the seat, placing your left foot on the ground to prevent the scooter from tilting. 3. Release the rear brake lever. 4. Look around to study the traffic situation and turn on your turn signal. 5. Slowly turn the throttle and drive away. Don't forget to turn off your turn signal.

The speed can be adjusted by turning the throttle. Turn it towards you to increase speed or away from you to reduce speed.

The most important period when using a scooter is the first 1000 miles. How to properly operate the scooter during this period, read on the “Running in” page. After 1,000 miles, change the engine oil and clean the oil filter. If engine problems occur during the break-in period, contact your dealer immediately.

Strictly observe the periodicity of technical inspection of the scooter. Periodic inspection, adjustment and lubrication will keep the scooter in safe condition and ensure maximum performance. It should be taken into account that weather/road conditions, geographical location and many other reasons will increase the frequency of maintenance.

Rating
( 2 ratings, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]