Snowmobile Taiga Varyag 550 v: country of origin, operating instructions, fuel consumption per 100 km, dimensions and engine, maximum speed, track and suspension

All-terrain vehicles produced by Russian Mechanics OJSC are very popular among residents of the northern regions of not only Russia, but also other countries. Where winter recedes for a few short months, there is always a demand for such equipment. The Taiga line is considered the most successful among the company's products. It includes about a dozen models, each of which also has several design options. "Varyag" represents a multi-purpose Wide Track class vehicle with utilitarian properties.

The Taiga Varyag 550 snowmobile is distinguished by comfort and ergonomics, which were achieved thanks to a shift in the center of mass. In addition, the snowmobile has heated grips and a bright front headlight, which allows you to pilot special equipment in severe frosts and at night.

In addition, the model received a comfortable seat that will make even a long trip comfortable. “Varyag” is chosen not only by winter recreation enthusiasts, but also by residents of northern settlements for use for economic purposes.

Which plant produces the unit?

The Tayga snowmobile is considered one of the most successful lines produced by the Rybinsk Machine-Building Plant. The first prototype was released in 1988, but only ten years later, after a number of modifications, its production was put on the assembly line. Varyag 550 represents a budget type of motorcycle-type snowmobile equipment, adapted to the harsh conditions of our country.

In this model, design engineers combined comfort, ease of use and accessibility. First of all, the manufacturer was guided by the fact that the equipment would be used for economic purposes.

“Russian Mechanics” traces its history back to the times of the Soviet Union. Initially, the enterprise was part of Rybinsk Motors OJSC. It was from his assembly line that the first domestic snowmobile “Buran” rolled off, which at one time was a stunning success. The new enterprise is a full-fledged successor and continuer of the best traditions of Soviet mechanical engineering in the field of special equipment.

Currently located in the Yaroslavl region in the suburbs of Rybinsk. All-terrain vehicles that came off his assembly line are popular not only in Russia, but also in neighboring countries. All products of the plant undergo multi-level quality control and comply with European standards.

Refinement and modernization of Taiga.

SergeyTayga

New guy

Evgeniy Omsk

Participant

SergeyTayga

New guy

Attachments

Sanila888

New guy

Good day to all sympathizers. Happy New Year. I’ll write here a little about my modifications to the Taiga 550V. 2021

The mileage is currently almost 800 km. The flight was excellent, I climbed only after maintenance. The heated right handle and rubber band on the Karbakh were changed by the officials under warranty.

Now about the improvements: 1. Temperature sensor, I didn’t bother with anything, bought the original, installed it, everything is clear.

2. After the first season, the footrests showed their bad side, the ice was constantly freezing, the foot would slip at the most inopportune moment, I solved the problem as follows, widened the small round holes and made one large one out of 4 small ones, and so on in 3 places, strengthened the footrest from below corner, and also bent the remaining metal towards the driver’s boot and made spikes out of them, it turned out neatly, and as this season shows, it’s very effective.

3. I installed extensions from Patrol, I don’t know for what reasons, but the original extensions from the official ones do not fit the geometry of the skis at all; from Patrol they fit like original ones.

4. I installed the factory bottom protection, as the rides showed, for good reason, I’ve already adjusted it a couple of times, without it the plastic would have been damaged.

5. Additional light was provided by LED headlights, through a stainless panel, connected directly to the battery via a toggle switch. The light is now just fire.

Attachments

Sanila888

New guy

6. Made a mount for an ax, weapon, knife and chainsaw. Everything is in place, nothing gets in the way, everything performs its functions clearly.

7. I made a dryer for mittens from aluminum, it dries clearly.

8. Modernized the rear trunk, welded it with pipes, now you can easily balance on any edge, holding on not only from the front, but also from the back, they also made horns on it for attaching a rope.

Yakutyanin_D

Old timer

6. Made a mount for an ax, weapon, knife and chainsaw. Everything is in place, nothing gets in the way, everything performs its functions clearly. View attachment 1383403 View attachment 1383404 View attachment 1383405

7. I made a dryer for mittens from aluminum, it dries clearly.

Sanila888

New guy

Yakutyanin_D

Old timer

Sanila888

New guy

Toz_34MOTO3

Veteran

Sanila888

New guy

OmProfy

Veteran

7. I made a dryer for mittens from aluminum, it dries clearly.

Barsyk

Veteran

New guy

kostyara72

New guy

Good day to all sympathizers. Happy New Year. I’ll write here a little about my modifications to the Taiga 550V. 2021

Now about the improvements: 1. Temperature sensor, I didn’t bother with anything, bought the original, installed it, everything is clear. View attachment 1383392 View attachment 1383393 View attachment 1383394

4. I installed the factory bottom protection, as the rides showed, for good reason, I’ve already adjusted it a couple of times, without it the plastic would have been damaged.

5. Additional light was provided by LED headlights, through a stainless panel, connected directly to the battery via a toggle switch. The light is now just fire.

Source

User manual

The snowmobile operating manual contains detailed information on the location of the main control elements, indicators, and warning labels. The manual provides detailed instructions for starting the engine using an electric and manual starter, as well as stopping it. Documentation comes complete with the new all-terrain vehicle, but if necessary, it can be found on the Internet or downloaded from the manufacturer’s official website.

Maintenance

In order for any equipment to serve for a long time and always be in good condition, it must be maintained. The manual provides detailed descriptions of the stages of maintenance of the main components of the all-terrain vehicle:

engine;
carburetor;
manual starter;
chassis;
transmissions;
control elements;
braking system.

A control inspection, checking fluid levels, and brake serviceability should be carried out every time before and after a trip. If complex operational problems occur, you should contact a specialized service center rather than trying to fix the problem yourself.

Types and frequency of maintenance

The first comprehensive maintenance of the vehicle must be carried out after running-in. Further, its frequency decreases:

TO-1	performed every 950-1050 kilometers
TO-2	do after 3000-3050 kilometers
Seasonal	commissioning after long-term storage

Break-in recommendations

How the equipment is used during the first time after purchase will determine its future performance. The duration of this period is from 250 to 350 kilometers.

In this case, the snowmobile owner must follow some recommendations:

ride without passengers;
choose areas with dense or compacted snow;
do not drive on very rough terrain, wet and loose snow;
observe the temperature regime from -25 to -3 degrees (higher temperatures increase the risk of engine overheating);
do not allow the engine throttle to open completely;
check the condition of fasteners;
after 150 km, check the alignment and tension of the caterpillar tracks;
Fill the tank with a mixture of fuel and engine oil in a ratio of 50:1.

It is also strictly not recommended to teach someone how to operate a new all-terrain vehicle during the break-in period. This can lead to unexpected overloads of the variator and power unit.

Refinement and modernization of Taiga.

Hunter36

New guy

Hunter36

New guy

Artkom

New guy

Artkom

New guy

Good day to all sympathizers.
Happy New Year. I’ll write here a little about my modifications to the Taiga 550V. 2021 Mileage at the moment is almost 800 km. The flight was excellent, I climbed only after maintenance. The heated right handle and rubber band on the Karbakh were changed by the officials under warranty.

4. I installed the factory bottom protection, as the rides showed, for good reason, I’ve already adjusted it a couple of times, without it the plastic would have been damaged.

5. Additional light was provided by LED headlights, through a stainless panel, connected directly to the battery via a toggle switch. The light is now just fire.

Source

Specifications

The model comes in two main variations. The Taiga Varyag 550 V snowmobile has technical characteristics similar to the 550 V SE modification. There are some discrepancies in the configuration and individual parameters.

Engine

In accordance with the model labeling, the motor of its own production RMZ-550 is used as the main driving force. The two-stroke power unit is equipped with two cylinders. Two paired carburetors are used to power the fuel system.

Main engine parameters:

Cylinder volume	0.553 liters
Diameter	7.6 cm
Piston stroke	6.1 cm
Power	55 horsepower
Carburetor type	float (Mikuni)
Cooling	air

The Varyag engine, like any two-stroke engine, has a joint lubrication system. The exhaust system is equipped with a traditional muffler with a resonator.

Daniila Rukin

Snowmobile specialist "Buran". I go fishing in my free time.

Ask a Question

A reed valve is installed on the intake system, which reduces fuel consumption. As high pressure builds up in the crankcase, it pushes fuel back into the carburetor. The special valve design helps prevent this.

Dimensions and weight

The structural weight of this snowmobile is 280 kg for the 550 V model and 295 kg for the 550 V SE. The vehicle has a reinforced tow bar to which the cargo sled is attached. In this case, the maximum weight of the cargo can reach a quarter of a ton. This is more than enough to accommodate not only your gear, but also a large catch or loot.

Other dimensional characteristics (indicated in meters):

Width	1, 05
Length (with skis)	2,99
Height (with windshield)	1,42

Caterpillar

All variations of the Varyag 550 model are equipped with a Composit track mechanism, which acts as a propulsion mechanism. The drive sprockets are located at the front of the unit. The length of the track surface is 50.8 cm.

In this case, the mover has the following parameters:

Length	3.968 m
Width	50 cm
Height of lugs	3 cm

The total height of the 550 V SE is 1.38 meters, while the track thickness is 2.2 cm.

Chassis

This all-terrain vehicle is based on a steel frame with a traditional pyramidal design. The front strut is equipped with two pneumatic shock absorbers.

Transmission

Both variations of the “Varyag” received a simplified automobile variator as a transmission, which is common for motorcycle-type vehicles.

The optionally installed transmission has two stages and four speeds:

reduced;
increased;
reverse (reverse);
neutral

Brake mechanism

Along with the transmission, a hydraulically controlled disc brake is installed on the chassis. However, the CE model received mechanical control.

Suspension

"Taiga 550" has a telescopic front and sliding rear suspension. In this case, the distance between the front skis reaches almost a meter (960 centimeters).

Other characteristics:

Name of spare parts	Front/Rear	550V	550V SE
Suspension travel	front	15 cm.	15 cm.
Suspension travel	rear	38.5 cm.	19 cm.
Propulsion shock absorber	front	two-pipe hydropneumatic	absent
Propulsion shock absorber	rear	single-pipe hydropneumatic	single-pipe hydropneumatic

Both models have a shock-absorbing mono-tube front suspension system. It is also hydropneumatic type.

Electrical equipment

Like any other snowmobile of this class and price category, the Varyag 550 has a standard set of electronics. The following elements are installed on board from the factory:

capacitive programmable ignition;
electric starter (duplicated by manual start, lever nearby);
halogen front headlight (with FF reflector) 55/60 power;
heating system for the throttle trigger and steering grips;
odometer and speedometer;
reverse

Daniila Rukin

Snowmobile specialist "Buran". I go fishing in my free time.

Ask a Question

The manufacturer quite often uses a programmable ignition system made in Italy, DUCATI CDI, in its equipment. It ensures stable operation of the power unit in various operating conditions.

Fuel consumption per 100 km

The fuel consumption declared by the manufacturer is about 20 liters per hundred kilometers. However, snowmobile owners note that this figure is slightly higher than nominal. So, when climbing uphill, the power unit consumes 25-28 liters. The same is observed when driving on loose snow. On a smooth surface, the machine burns approximately 23-24 liters of fuel.

Tank volume and fuel type

Since the snowmobile is equipped with a standard two-stroke engine with a mixed lubrication system, it does not require a separate oil reservoir. To power the power unit, a fuel mixture of gasoline and motor oil is used, taken in a ratio of 40 to 1. In this case, AI-92 gasoline should be used.

The fuel tank capacity is 40 liters.

Maximum speed

In accordance with the design features of the main power plant, capable of delivering power of 36.78 kilowatts (55 horsepower), the maximum speed of the snowmobile is 80 km/h. The car quickly accelerates on compacted snow to 60-70 km/h. At the same time, you can squeeze out more on ice.

Driver heating

Since the model belongs to the budget class of snowmobile equipment, there are not many devices installed here in terms of comfort. We talked above about heating the gas trigger and steering wheel grips - this is where all the options for heating the driver end. The model does not have seat heating, passenger handles or helmet visor heating, as in more expensive analogues.

Video

Visually, the Taiga Patrol 800 SWT also differs from the classic representatives of the line. The front hood received a different shape (the appearance of the air intake openings changed and the headlights rose slightly). The changes also affected the dashboard.

In terms of quality, the Taiga Patrol 800 SWT model has reached a new level. Chinese manufacturers are not popular on the engine and component market, which is why the main mechanisms were modified by domestic specialists. As a result, it was possible to achieve system reliability and increase service life. The equipment warranty has been increased to 3 years (or 3000 km). The snowmobile is not afraid of harsh climates, since it was systematically adapted to difficult working conditions. Domestic quality, endurance, ease of operation and efficiency have made the Taiga Patrol 800 SWT model the leader of the Russian snowmobile market.

You can travel by car together, taking with you a trailer with an additional load. At the same time, the Taiga Patrol 800 SWT is not just a “hard worker”, but a vehicle that is pleasant to make long trips with. The ergonomics of the driver and passenger seats in the new product from Russian Mechanics have been revised. Already in the basic modification, the snowmobile acquired a 2-level seat with a removable backrest and a comfortable steering wheel.

Features of the Taiga Patrol 800 SWT model:

2-level seat with a spacious trunk for things and a high-capacity battery (45 Ah);
a modernized steering wheel unit with buttons for switching headlights, heating and electric start;
footrests with enlarged holes;
Koso instrument panel with many functions. The panel allows you to control the operation of systems, showing information about the coolant temperature, the presence of engine malfunctions, and engine speed. The tachometer, speedometer and oil pressure sensor are also located here.
towbar with the ability to tow a trailer weighing up to 500 kg (present in the basic configuration).

Taiga Patrol 800 SWT is a modern model that will delight the customer with high technical capabilities and an affordable price. The snowmobile has European certification and complies with the safety and legal requirements in force in Europe. The CE certificate of conformity allows you to export equipment to EU countries.

How to strengthen the chassis

The chassis of a snowmobile directly affects fuel consumption. Low cross-country ability and poor maneuverability add stress to the engine when traveling over rough terrain. To improve the driving properties of the all-terrain vehicle, you can try adjusting the rear suspension and ski toe. The second factor affects the vehicle’s maneuverability in difficult areas. If the ski base is not adjusted correctly, the driver will feel vibration in the windshield and steering wheel while riding.

Rear suspension adjustment

Under the weight of the load, the snowmobile sags, like any other mechanism. With a driver and passenger, the rear of the car invariably lowers. To improve the driving performance of the car, it is necessary to adjust the springs so that this indicator is in the range from 5 to 7 centimeters.

In this case, the weakening of the tape stop should be about 3 - 3.5 cm. The traction force of the unit with the road depends on how much weight presses on the tracked base. The shorter length of the limiter helps reduce pressure on the track, which in turn allows for more efficient vehicle control.

To set up a tape stopper, you need to:

press on the front springs;
unscrew the nut of the limiter bracket;
move the bolt on which the belt is attached to the desired position;
secure the nut.

It should be remembered that to reduce the steering gain, the bolt is fixed in the lower hole. If the skis are too upturned, the bolt is moved to the upper position.

Tips for adjusting the rear suspension

Yaw noticeable

First check the alignment of the skis. Adjust if necessary. Reduce spring tension at rear.

You feel stiffness (or lack thereof) of the rear suspension while driving

Reduce (or increase) spring tension.

The caterpillar mover slips a lot when starting off

Move to the passenger seat. Move the limiter bolt to the lower hole on the bracket.

Noticeable interruptions in the operation of the front limiter

Again, move the bolt to the lower position.

Alignment and adjustment of skis

In order for a snowmobile to behave confidently on the road, it is necessary to check the alignment of the skis from time to time. This indicator can be calculated by measuring the distance between the front (A) and rear (B) edges of the ski track and finding the difference between them. In this case, the equality must be satisfied: A-B = 10mm.

Toe check

The following manipulation should be carried out before and after adjusting the skis. To function properly, the ski base must be positioned straight and forward. Checking this is quite simple - you need to apply an even beam first to one and then to the other ski track.

The distance between the beams at the front end of each of them should be exactly 5 mm.

Adjustment

To adjust the toe of the ski track, you must perform the following sequence of actions:

check the position of the steering wheel and set it to the “straight forward” position;
loosen the locknuts of the rods;
rotate the tie rods until the distance between the front edges of the skis is 10 mm less than between the rear ones;
retighten the locknuts.

Daniila Rukin

Snowmobile specialist "Buran". I go fishing in my free time.

Ask a Question

Under no circumstances should you try to adjust the position of the steering wheel by turning the bolt on a regular 20.27 rod.

Advantages

Most of those who bought this snowmobile are satisfied with the purchase. It is distinguished by its smooth running, the ability to start even in severe frost, heated seats, handles, gas valve and other useful little things that are not always found on domestic vehicles. Many people had previously owned a Buran snowmobile from the same company and noted how much more stable a two-lane snowmobile with one track was when driving along a slope. For driving on a snowy track, however, this is a controversial factor. With a narrow track, the caterpillar will not fit into it and can fall off along the edges when driving, but the Buran overcomes such a road, keeping its only ski in the track, where it easily fits.

Among the advantages, many also note the high-quality gasoline engine, which does not consume much fuel. This happens largely thanks to a high-quality carburetor.

Minuno is an excellent model that allows you to reduce fuel consumption, even when the engine operates in extreme conditions.

Advantages and disadvantages

To get a more complete picture of the pros and cons, you should look at reviews, read reviews of the Taiga Varyag 550 snowmobile - reviews from owners, opinions of independent experts form an objective assessment of any product, including special equipment.

What are the advantages of Varyag 550

Most models in the Tayga line are capable of accelerating from 60 to 100 kilometers per hour. Moreover, they behave equally well both on a road with a compacted track, dense snow cover, and on freshly fallen wet or loose snow. This distinguishes them favorably from their older brother, who also came off the Rybinsk assembly line.

Although the Varyag 550 is positioned as a budget all-terrain vehicle, it has a fairly powerful engine that can withstand heavy loads. This has a positive effect on its utilitarian qualities. A reliable towbar allows you to pull a load weighing up to a quarter of a ton. At the same time, the snowmobile will confidently carry the pilot and passenger.

Among the advantages are:

build quality, good finish;
powerful power unit;
high traction qualities;
good handling;
simple maintenance.

In addition, the all-terrain vehicle has a high rear suspension and a bright halogen lamp. This modification also has a comfortable backrest for the passenger seat.

What disadvantages were noticed

Without going into too much detail, we can say that this snowmobile represents the perfect balance of price and quality. However, like any technique, it is not without its drawbacks.

These include:

the seats are too hard and not suitable for long trips;
relatively small power reserve;
high gasoline consumption;
no seat heating;
there is no water circuit for cooling;
long break-in period.

For the most part, the owners of this Varyag model do not regret their purchase. Some note the high cost of the new model at dealers. The manufacturer explains this simply - the design of the snowmobile uses many imported parts (Italian ignition system, Japanese carburetor), which are much more reliable than domestic ones.

In addition, even those elements that are assembled in Russia are often also made from imported materials.